LoRa Mesh blog

Month: November 2026

  • Repeater temperatures in the Colorado mountains

    Sunrise has just begun in the mountains of Colorado.  The temperature in Denver is 23°F just now.  Here are conditions just now at some of the backbone repeaters that are at high elevations in the mountains of Colorado:

    Each of these repeaters was deployed only within recent months, meaning that none of these repeaters has yet been through a full Colorado high-elevation winter.  We check them frequently to see how they are doing.

  • Getting telemetry from repeaters

    INA219 current sensor
    click to enlarge

    In the Public channel for the Colorado meshcore community, a participant recently mentioned experimenting with a sodium-ion cell as the energy storage for a solar powered repeater.  I invited the participant to share any results of the experiments.  The participant then said “I will try. Would be a whole lot easier if it was actually possible to get telemetry from remote nodes.”   This article talks about how to get telemetry from a remote node, for example using the current sensor seen at right. (more…)

  • Acceptance testing of antennas

    damaged yagi antenna
    click to enlarge

    The volunteers who have a goal of providing Meshcore coverage in the mountains of Colorado do not have it easy.  The antenna provided on an “off-the-shelf” LoRa repeater usually turns out to be inadequate for the needs of a high-elevation site where the next repeater is perhaps forty miles (sixty kilometers) away.  We build our own repeaters, using parts from many sources, and we find it necessary to do acceptance testing on the parts.  This article talks about acceptance testing of the LoRa antennas that we use in our mountain repeaters.

    (more…)

  • Photons to spare

    a repeater in a tree
    click to enlarge

    The volunteers who have a goal of providing Meshcore coverage in the mountains of Colorado do not have it easy.  We draw upon ham radio experience, and we make use of topographic maps and other tools, to try to figure out where to put a “next repeater” to extend coverage to a new part of Colorado.

    Of the several dozen Meshcore repeaters that have thus far been deployed in the mountains of Colorado, fewer than half a dozen have the luxury of “land power” — nearly all rely upon solar power.  Maybe you can see the solar panel on the repeater shown at right?

    We worry a lot about whether a solar-powered repeater will survive cloudy days.  This prompts us to use a big battery and a big solar panel.  But it also prompts us to try to monitor the energy production of the solar panel.  This blog article describes the results of some of this monitoring for the repeater in the photo above.  As you will see, as of press time in November of 2026, it seems we have photons to spare.

    (more…)